Maestro Wireless

Components

Maestro Wireless dimmers, switches, and lamp dimmers can be controlled by the wireless occupancy sensor and/or wireless controller.

Maestro Wireless Dimmers

Maestro Wireless Switches

Maestro Pico
Wireless Controllers

Maestro Wireless
Occupancy/Vacancy Sensors

Maestro Wireless Lamp Dimmers

Features

Maestro Wireless gives you total lighting control including integrated dimmers, switches, lamp dimmers and occupancy sensors.

Key features include:

Control lights from outside or inside.
One touch light level recall.
Wireless occupancy sensor and dimmer provide energy savings.
LEDs glow softly in the dark and show preset light level when dimmer is off.
20 second delayed fade-to-off allows you to safely leave the room.
Full range dimming possible from up to ten locations.
Control up to 10 Maestro Wireless devices with a wireless controller.
Multi-location dimming compatible with 3-way wiring for easy installation.
Power failure memory

Applications

Entry/Welcome Home

Maestro Wireless can put the minds of homeowners at ease. With a PicoTM wireless control kept in the car they can turn lights on to welcome them home. Access to these lights is even easier when a Pico wireless control is mounted where there was never a switch before.

Components Used in This Application
Control Outside Lights	Control Inside Lights	Control Lights from Car	New Point of Control

Master Bedroom

Homeowners can save energy and set the mood in the master suite with the help of Maestro Wireless. A wireless occupancy sensor ensures bathroom and closet lights are never left on, while a Pico wireless control at the bedside can set the perfect light level.

Components Used in This Application
Bedroom Ceiling Lights	Bedside Lamps	Fluorescent Bathroom Light	Turn On/Off Bath Lights	Control Lights from Bedside

Family Room

Homeowners can bring energy savings – and a little bit of movie magic – to their family room with Maestro Wireless. With a Pico wireless control, lights can easily be adjusted at the touch of a button. A favorite light level can even be saved so the one used most can be returned to again and again. Setup is simple, taking less than a minute.

Components Used in This Application
Control Overhead Lights	Floor Lamp	Tabletop Control

Restroom

Restrooms are an area where lights are often left on indefinitely. A wireless occupancy sensor is an ideal solution that requires no wiring and is easy to setup. Simply install a Maestro Wireless dimmer or switch and mount the occupancy sensor to the ceiling – now lights will turn off when the room is unoccupied, saving energy.

Components Used in This Application
Control Overhead Lights	Turn On/Off Lights

Conference Room

Conference room lights can be left on even when the room is unoccupied. Pairing a Maestro Wireless dimmer or switch with a wireless occupancy sensor ensures lights are off when they aren’t in use. A Pico wireless control adds flexibility to meetings, so lights can be adjusted for a presentation without interruption.

Components Used in This Application
Halogen Down Lights	Turn On/Off Lights	Control Lights From Table

Setup and Configuration

Maestro Wireless products can be set up quickly and easily.

Step 1

Press and hold the dimmer or switch tap button for approximately six seconds.

Once the LED(s) starts to blink slowly,
release the tap button.

Step 2

Press and hold the “off” button on the PicoTM wireless control or sensor for approximately six seconds.

When the dimmer or switch learns the Pico wireless control or sensor, its LED and load will flash three times and the device will exit setup mode.

Repeat steps 1 and 2 to set up multiple Pico wireless controls or sensors to a single dimmer.

Repeat steps 1 and 2 to set up a single Pico wireless control or sensor to multiple dimmers.

About Pico

One Pico. Four Different Ways to Use It.

Handheld Wireless Control

Communicates wirelessly with up to 10 Maestro Wireless dimmers, lamp dimmers and switches.

Includes adhesive for wall mounting.

Wall Mount

Mounts on wall without need to run new wires.

Included with Pico Wireless Control.

Wallplate sold separately.

Car Visor Clip

Control lights from outside on entering and leaving house from your vehicle.

Works up to 100 feet away.

Sold separately from Pico Wireless Control.

Table Stand

Table stand lets you conveniently control lights from end table, coffee table, bedside or any other solid horizontal surface.

Sold separately from Pico Wireless Control.